-
Unsaturated polyol ester series
Acid value
(mg KOH/g)Iodine value
(gI2/100g)Hydroxy value
(mg KOH/g)Saponification value
(mg KOH/g)Kinematic Viscosity
@40℃ (mm2/s)PRIOLUBE 2101-LQ-(SI)
≤1
75~90
≤7
175~185
≤53
PRIOLUBE 2722-LQ-(SI)
≤0.8
85~110
≤10
170~195
62~68
PRIOLUBE 2738-LQ-(SI)
≤1
——
≤15
180~230
62~74
PRIOLUBE 2739-LQ-(SI)
≤1
——
125~140
165~180
105~125
Trade name
Pour point
(℃)Flashpoint c.o.c
(℃)Demulsibility
(min)COLORLOVIBOND
(1’’ cell),Y/RMoisture
(%)PRIOLUBE 2101-LQ-(SI)
≤-39
≥300
≤25
≤10/1.5
≤0.1
PRIOLUBE 2722-LQ-(SI)
≤-21
≥300
≤25
≤10/2
≤0.1
PRIOLUBE 2738-LQ-(SI)
≤-27
≥300
≤30
≤10/3
≤0.1
PRIOLUBE 2739-LQ-(SI)
≤-10
≥200
——
——
——
Appearance
@25℃,Light yellow liquid
Product Introduction
The above four products are oleate; Priolube 2101/2722/2738 is a biodegradable polyol ester with good hydrolysis stability. Priolube 2739 is a polyol partial ester with excellent lubrication and easy emulsification properties.
Package
Net Weight:190kg/900kg/about 20000kg, Packaging:Plastic drum/IBC drum / Flexitank or other negotiatory manners
Application fields
Priolube 2101/2722/2738 is widely used as base oils and additives to enhance lubrication properties
Priolube 2739 is widely used in rolling fluid and metal working fluidPerformance feature
Excellent lubrication: reduced wear, extended tool/roll life, improved surface finish, resulting in consistent cutting and forming tolerances, thereby reducing the cost to the user of remachining components.
Biodegradability: comply with local laws and regulations, conform to the trend of environmental protection, conducive to the promotion of customers
Priolube 2101/2722/2738:
High flash point (≥310℃) : Good fire resistance meets industry standards required for special applications, such as HFDU. Can be safely used in pure oil cutting operations, especially where high heat is generated, and users want maximum lubrication to improve tool life and surface finish.
Hydrolytic stability: used for alkaline water-based products without deterioration, thus maintaining its lubricity.
Good low temperature performance: can be used in a variety of hot and cold climate conditions, the physical form and performance of the product will not cause any adverse effects.
For pure and water soluble oil formulations: help customers rationalize SKUs and provide versatility to improve the performance of both pure and water soluble products.
Priolube 2739:
Excellent emulsion stability: excellent emulsion stability reduces concentrate addition, provides stable metal quality and reduces product failure rateProposed dosage
Priolube 2101/2738:
Prelubrication protection:98%MAX
Tin steel sheet rolling:60% MAX
Cutting and grinding oil:5~15%
Cutting and Grinding (water-soluble):5~95%
Wire drawing and stamping oil: 5~15%
Wire drawing and stamping oil:5~95%
FRHF-HFDU:98% MAX
mold release agent:98% MAX
Appropriate use according to production needs.Priolube 2722:
Cold rolling oil:20~40%
Spinning auxiliaries for chemical fiber:5~10
Cutting and grinding oil:5~15%
Cutting and Grinding (water-soluble):5~95%
Wire drawing and stamping oil:5~15%
Wire drawing and stamping oil:5~95%
FRHF-HFDU:98% MAX
Mold release agent:98% MAX
Appropriate use according to production needs.Priolube 2739:
Rolling liquid:5~30%
Cutting and grinding oil:5~30%
Cutting and Grinding (water-soluble):5~30%
Wire drawing and stamping oil:5~30%
Wire drawing and stamping oil:5~30%
Appropriate use according to production needs.Trade name
Appearance
@25℃Acid value
(mg KOH/g)Saponification value
(mg KOH/g)Kinematicviscosity
@40℃ (mm2/s)COLOR LOVIBOND
(1’’ cell), Y/R
CITHROL 4MO-LQ-(SI)
Clear liquid
≤5
75~95
37~47
≤10/3
Product Introduction
Nonionic surfactant.
Package
Net Weight:195kg/1000kg, Packaging:Plastic drum/IBC drum or other negotiatory manners
Application fields
Can be used as emulsifier, wetting agent, dispersant and solvent increase, but also used in cream, emulsion cosmetics, textile industry additives, metal cleaning agent and polishing agent preparation
Performance feature
Good emulsifying, dispersing, wetting and solubilizing properties
Proposed dosage
Appropriate use according to production needs
Trade name
Appearance
@25℃Acid value
(mg KOH/g)GARDNER color
Kinematic viscosity
@40℃ (mm2/s)Moisture
(%)PRIOLUBE 2741-LQ-(SI)
Light yellow liquid
8~10
≤6
70~105
≤0.1
Product Introduction
Special polyol fatty acid ester
Package
Net Weight:190kg/900kg/about 20000kg, Packaging:Plastic drum/IBC drum / Flexitank or other negotiatory manners
Application fields
Can be used as a base oil or additive to provide excellent lubrication, its good annealing cleaning, for metal rolling fluid and high temperature metal working fluid is very important
Performance feature
Suitable for pure oil and water soluble oil formulations: help customers rationalize SKUs and provide versatility to improve the performance of pure oil and water soluble products
Good annealing cleanness: It is important for metal rolling, especially when the plate is annealed without electrolysis cleaning in the rolling pure plate technology
High flash point (250 ° C) : Safe for use in pure oil cutting operations, especially where high heat is generated and maximum lubrication is desired to improve tool life and surface finish
Biodegradability: comply with local laws and regulations, conform to the trend of environmental protection, conducive to the promotion of customers
Low Volatility: Suitable in low fog formulations for high speed and high energy operation. Users can reduce the amount of additives such as polybutylene (PIB) or polymethacrylate (PMA) added
Suitable for pure oil and water-soluble oil formulations: help customers rationalize SKUs and provide versatility to improve the performance of pure oil and water soluble productsProposed dosage
Tin steel sheet rolling:60% MAX
Aluminum hot rolling:5~20% -
Saturated polyol ester series
Trade name
Acid value
(mg KOH/g)APHA color
(Hazen)Kinematic viscosity
@40℃ (mm2/s)PRIOLUBE 2720-LQ-(SI)
≤0.1
≤350
18~22
PRIOLUBE 2740-LQ-(SI)
≤0.1
≤350
18~22
PRIOLUBE 3970-LQ-(SI)
≤0.1
≤1.5 (Gardner color)
18~21
Trade name
Kinematic viscosity
@100℃ (mm2/s)Pour point
(℃)Flash point
c.o.c (℃)Moisture
(%)PRIOLUBE 2720-LQ-(SI)
4.3~4.7
≤-42
245~345
≤0.1
PRIOLUBE 2740-LQ-(SI)
4.3~4.7
≤-36
245~345
≤0.1
PRIOLUBE 3970-LQ-(SI)
4.3~4.6
≤-45
245-350
≤0.1
Appearance
@25℃, Light yellow liquid
Product Introduction
It is a biodegradable saturated polyol ester with high oxidation stability and hydrolysis stability. It is used to enhance lubrication performance and is suitable for high and low temperature working environment.
Package
Net Weight:180kg, Packaging:Plastic drum or other negotiatory manners
Application fields
lubricant additive
Performance feature
Low viscosity (4.5 mm2/s at 100℃) : User can prepare 0W and 5W oils with high combustion efficiency and low engine wearExcellent low temperature characteristics: helps the engine start at low temperatures, improves fuel efficiency and reduces engine wear
High polarity: helps the additives dissolve, helps to resist the shrinkage of the sealing material caused by PAO and three types of base oils, and has the ability to self-clean the carbon deposits
Good antioxidant stability: Prolonged oil change cycle, reduced volatile emissions and engine sediment
Low volatility: Reduces the loss of oil volatilization at high engine temperatures. Reduce oil thickening (grading), emissions, oil consumption and valve carbon deposition.High cost performance: it can be used with low quality base oils because of its excellent low temperature properties, good additive compatibility and the ability to balance the shrinkage of sealing materials caused by PAOProposed dosage
High temperature grease:10~90%
Gear oil: 98%MAX
EAL grease:10~90%
Chain oil:98% MAX
Air compressor oil:98% MAX
Metal working fluids (cutting/grinding):5~95% -
Monoester series
Trade name
Acid value
(mg KOH/g)Hydroxyl value
(mg KOH/g)Kinematic viscosity
@40℃ (mm2/s)COLOR LOVIBOND
(5 1/4’’ cell), Y/RPRIOLUBE 2018-LQ-(SI)
≤0.5
≤3
7.5~9.5
≤8/1.5
Appearance
@25℃, Light yellow liquid
Product Introduction
Oleate. Important organic chemical raw materials
Package
Net Weight:170kg/850kg,Packaging:Plastic drum/IBC drum or other negotiatory manners
Application fields
Used as oil additive, fiber lubricant, etc
Performance feature
Excellent viscosity-temperature characteristic, good low temperature characteristic, high temperature stability, low volatility
Proposed dosage
Appropriate use according to production needs
Trade name
Acid value
(mg KOH/g)Iodine value
(gI2/100g)APHA color
(Hazen)Saponification Value
(mg KOH/g)CRODAMOL OP-LQ-(SI)
≤0.2
≤1
≤50
146~161
Refractive index
@25℃Specific gravity
@25℃Cloud point
(℃)Moisture
(%)1.445~1.446
0.85~0.86
-10~-2
≤0.1
Appearance
Clear liquid
Product Introduction
High purity senior fatty acid ester
Package
Net Weight:170kg/175kg,Packaging:Plastic drum/steel drum or other negotiatory manners
Cosmetics and daily chemical raw materials, widely used in skin care products and cosmetics, is an excellent skin softening agent
Performance feature
Clear liquid, odorless, insoluble in water, soluble with most solvents. Stable, not easy to oxidize or produce peculiar smell
Proposed dosage
Appropriate use according to production needs
Trade name
Odor
Acidvalue
(mg KOH/g)Iodine value
(gI2/100g)Gardner
colorSaponification value
(mg KOH/g)CRODAMOL OHS-LQ-(SI)
No irritating odor
≤4
≤5
140~159
Refractive Index
@25℃Specific Gravity
@25℃Cloud point
(℃)Moisture
(%)2-ETHYL-1-HEXANOL
Content (ppm)1.455~1.458
0.895~0.910
11~16
≤1
≤110
Appearance
@30℃,Colorless to yellow transparent liquid
Product Introduction
Senior fatty acid ester. It is a light, liquid emollients derived from 2-ethylhexyl alcohol
Package
Net Weight:180kg,Packaging:Steel drum or other negotiatory manners
Application fields
Raw materials of cosmetics. Recommended for skin creams and lotions, hair care products and pigmented make-up
Performance feature
Clear liquid, no irritating odor
Proposed dosage
Appropriate use according to production needs
-
Diester series
Trade name
Acid value
(mg KOH/g)APHA color
(Hazen)Kinematic viscosity
@40℃ (mm2/s)Kinematic Viscosity
@100℃ (mm2/s)Pour point
(℃)PRIOLUBE 3959-LQ-(SI)
≤0.1
≤30
7.4~8.3
2.3~2.6
≤-60
Flash point
c.o.c (℃)Moisture
(%)Density
@20℃ (g/ml)Refractiveindex(n20D)
Free alcohol
(% m/m)185~350
≤0.05
0.922~0.928
1.445~1.448
≤0.1
Appearance
Clear liquid
Product Introduction
Priolube 3959 is a high oxidatively stable and biodegradable ester with excellent low temperature flow properties enabling it to be used in both high and low temperature applications
Package
Net Weight:190kg/900kg,Packaging:Plastic drum/steel drum/IBC drum or other negotiatory manners
Application fields
Excellent cold resistant plasticizer. High performance synthetic lubricant base fluid and additive
Performance feature
Biodegradable: Compliance with local environmental regulations
High thermal and oxidative stability: Improved in-service operation, longer life
Low temperature flow: Excellent performance under extreme environmental conditionsProposed dosage
Appropriate use according to production needs
-
Complex ester series
Trade name
Acid value
(mg KOH/g)Kinematic viscosity
@40℃(mm2/s)Viscosity
indexPour point
(℃)Flash point
c.o.c (℃)Moisture
(%)PRIOLUBE CE-1800-LQ-(SI)
≤0.5
1500-2000
≥168
≤-15
≥280
≤0.1
Appearance
@25℃, Clear liquid
Product Introduction
It is a high temperature stable ester which enables it to be used in quenching oils
Package
Net Weight:180kg,Packaging:Steel drum or other negotiatory manners
Application fields
Stable at high temperature, used for metal processing and quenching
Performance feature
Biodegradable: Compliance with local environmental regulations
High thermal and oxidative stability: Improved in-service operation, longer lifeProposed dosage
Appropriate use according to production needs